User Tools

Site Tools


pidflightlap:ethernet

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
pidflightlap:ethernet [2018/06/10 08:02]
cmengler [How to setup Ethernet module for lap timing device]
pidflightlap:ethernet [2018/06/10 08:05]
cmengler [How to setup Ethernet module for lap timing device]
Line 7: Line 7:
 {{ :​pidflightlap:​pidflightlap_enc28j60_shield.png?​400 |}} {{ :​pidflightlap:​pidflightlap_enc28j60_shield.png?​400 |}}
  
-  - Flash the PIDflight Lap Ethernet firmware to the Arduino Nano to be used for the ENC28J60 Ethernet Shield. Refer to [[pidflight:​flashingfirmware|Flashing firmware to lap timing device]], same process applies for flashing HEX files to Arduino.+  - Flash the PIDflight Lap Ethernet firmware ​({{:​pidflightlap:​pidflightlap_ethernet_0.0.1.zip|Download}}) ​to the Arduino Nano to be used for the ENC28J60 Ethernet Shield.
   - Configure your PC wired network connection.<​code>​   - Configure your PC wired network connection.<​code>​
 Static IP: 192.168.4.60 Static IP: 192.168.4.60
pidflightlap/ethernet.txt ยท Last modified: 2018/06/10 08:05 by cmengler