User Tools

Site Tools


pidflight:rx5808spimod

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

pidflight:rx5808spimod [2017/05/30 10:08] (current)
cmengler created
Line 1: Line 1:
 +====== PIDflight Lap ======
 +===== How to do the SPI mod on the RX5808 =====
 +There are reports some RX5808 modules are being supplied with the SPI mod already done. However in the case you may need to perform the modification,​ please refer to the information below.
  
 +===== Procedure =====
 +  - Carefully remove the metal casing from the RX5808, using a soldering iron to heat the soldered sections around the case.
 +  - Locate the SMD resistor that is required to be removed to enable SPI.
 +  - Carefully remove the SMD resistor from the circuit.
 +{{ :​pidflight:​rx5808-spi-mod.jpg?​nolink&​400 |}}
 +
 +----
 +References:
 +  * https://​github.com/​sheaivey/​rx5808-pro-diversity/​blob/​master/​docs/​rx5808-spi-mod.md
pidflight/rx5808spimod.txt ยท Last modified: 2017/05/30 10:08 by cmengler